Welcome to Gaia! ::

PART 1 = Notation

The side descriptors are:
U for the top (Upper) side,
u for the 2nd layer down from the top (just below the upper side),
L for the left hand side
l for the 2nd layer in from the left hand side
F for the front side
f for the 2nd layer in from the front side
R for the right hand side
r for the 2nd layer in from the right hand side
D for the down (bottom) side
d for the 2nd layer up from the down (bottom) side, and
H for the horizontal center slice (between u and d).

The color you start with does not matter, however the positioning of the pieces shown in this picture do matter, you must solve your cube to this point, on the front side the two pieces shown can be placed in those spots by turning the "u" and "d" layers as well as the L, R, F, and B layers
To get the green pieces onto the bottom, all you have to do is line up the pieces as shown in the picture then follow this formula
L'l' F2 Ll

3. Solve the remaining points (on the sides)


This is your next step, solving so that the cube look like this.

Do accomplish this, all you really have to do is use the F L R B d and u turns,

Turn the d layer freely until you have the piece in the right spot then use the F turn to put the points into the upper layers until your cube looks like figure 3