|
|
|
|
|
|
|
 Posted: Wed Jul 06, 2005 7:05 am
[ Message temporarily off-line ]
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jul 06, 2005 2:54 pm
Alcohol disolves resin really well. I suggest filling your pipe with alcohol, then putting some salt in there. The salt is really abbrasive and will kinda act like "scrubbers" for your alcohol. That is how I clean my bong.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jul 06, 2005 8:37 pm
yea but you don't want to disolve the resin b/c it's still good to smoke when you are out of pot. some old tricks ive used are a safety pin or a wire coat hanger (be careful not to break the bowl if you use the hanger though)
other than that, good luck
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jul 06, 2005 9:29 pm
Run Iso through your pipe and make oil from the resin. If you know what you're doing, you can get some pretty sweet results.
xd
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jul 06, 2005 10:33 pm
I don't think I explained myself very well. I've got it all loose, it just wont come out! It's stuck inside, and all the openings are too small for the chunks of resin to get out. I tired breaking it up but it's just too sticky... the only thing that can fit all the way through the shaft is a paper clip, everything else is too big.
The design of the shaft isn't straight (that's why I'm having trouble with this one). I guess it's hard to explain maybe I can get a digital camera some how and post it...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jul 06, 2005 11:08 pm
prettyXhateXmachine I don't think I explained myself very well. I've got it all loose, it just wont come out! It's stuck inside, and all the openings are too small for the chunks of resin to get out. I tired breaking it up but it's just too sticky... the only thing that can fit all the way through the shaft is a paper clip, everything else is too big. The design of the shaft isn't straight (that's why I'm having trouble with this one). I guess it's hard to explain maybe I can get a digital camera some how and post it... The alcohol will still dissolve the resin, and make everything "unfunky".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 07, 2005 1:18 am
If I use alcohol won't that mean I can't smoke the resin...?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 07, 2005 1:41 am
prettyXhateXmachine If I use alcohol won't that mean I can't smoke the resin...?
Sometimes you have to take one for the team and not smoke it.
You should clean your deal more and prevent this from forming again.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 07, 2005 10:19 pm
Arikeu prettyXhateXmachine If I use alcohol won't that mean I can't smoke the resin...?
Sometimes you have to take one for the team and not smoke it.
You should clean your deal more and prevent this from forming again.there is always a way! try boiling the resin down as hot as you can get it to kinda liquify it to come out. dunno if it will work, but its probably worth a shot.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jul 09, 2005 3:17 am
I've only ever had one glass pipe, but it broke before I could clean it, so I really don't know how to help. For metal pipes, we just melt the resin with a torch and it just oozes out on it's own. I don't know if that will work for glass because I think glass breaks when it gets too hot, but like I said, I really don't know how to help.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jul 09, 2005 11:58 am
The longer that resin sits in there, the funkier it is gonna get! You better remember that. xd
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jul 09, 2005 1:17 pm
No worries guys... I got it all the other day. I just had to keep working at it rofl
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Jul 10, 2005 1:41 am
prettyXhateXmachine No worries guys... I got it all the other day. I just had to keep working at it rofl I hope it was worth the effort. xd
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reply
