This is for pack and pee's. For other packy's, you may ignore some steps.
I was looking at the c**k sock, wanting one, and then I thought about what I could do to make one of my own, and
voila I made one really easy.
xxFirst step: Get a sock. One that your packy can easily fit into (like a size large); it doesn't matter if it's long or short, because you'll be cutting off the top anyway. The toe of the sock is where your packy is going to be sitting.
Step two: Holding the sock vertically, cut straight across from where the heel is. Don't cut all the way through. Once you've made a hole big enough for the packy to fit into, cut upwards until you hit the sock's "cuff." Cut the cuff completely off. There should be no heel left in the sock. (The cuff is the part that squeezes your leg; it looks ribbed on most socks.)
sStep three and especially four are only if you have a pack and pee.
xxStep three: Cut a
small hole halfway between the end of the toe and your first cut (where the heel was). This is where the shaft will come out. Don't cut too far down, so that you can tuck in the shaft to the toe so you don't look erect, but cut a line vertically (not a hole or circle) so that you'll be able to move the shaft in and out of the sock easily for when you pee (if you're using a pack and pee).
xStep four: Cut a tiny hole in the reverse side of the sock for the tube (on pack and pee's). You will not have to tuck this in to the rest of the sock, but you can tuck it upwards if it's more comfortable to you.
Step five: Get a pair of boxers (or whatever kind of underwear you wear) and two safety pins. If you cut correctly, there should be a flap of sock left at the top. This folds over the top of your underwear where you can pin it in place.
Congratulations! You reused a nasty old sock and got something worthwhile out of it!
Reply
